Cino L780WD - Manual (Page 12)

Remote Control
You can use the Remote Control commands to control the scanner(s) from the remote host either by left clicking the
connected scanner’s device name directly or clicking the “Global Control” button after you choose the scanner(s)
desired to be remote controlled.
Remote Indicator
This command allows you to page, send remote beeping, remote vibration or both beeping and vibration to the
scanner(s) from the remote host.
Paging: This paging function is helpful to locate the scanner. Once you clicked the “Paging” button, the scanner will
gives 6 “Di-Do-Di-Do” paging sounds.
Remote Beeping: You can set up the beeping type and the number of beep first, then click the “Remote
Beeping” button to send the remote beeping to the scanner(s).
9