Coda Multichannel A/V Amplifier V12 - Manual (Page 13)

12 TECHNICAL DATA
AMPLIFIER v12
Rated Power: 120 Watts with 25 Watts class A @ 8 Ohms both channels driven from 20Hz to 20kHz
Frequency Response: DC to -3dB @ 100kHz
Distortion: < .1 percent from 10Hz to 20kHz @ 100 Watts both channels driven into
2 Ohm through 8 Ohms
Gain: 26dB
Maximum Current: >60 Amperes peak per channel
Noise: -100dB referenced to rated output
input Impedance: 50k Ohms unbalanced/1k Ohms balanced
Output Impedance: .08 Ohms from 20Hz to 20kHz
BRIDGED
Rated Power: 400 Watts with 25 Watts class A @ 8 Ohms mono from 20Hz to 20kHz
Frequency Response: DC to -3dB @ 100kHz
Distortion: < .1 percent from 10 Hz to 20kHz @ 400 Watts driven into 4 Ohms through
8 Ohms
Gain: 32dB
Maximum Current: >60 Amperes peak
Noise: -100dB referenced to rated output
Input Impedance: 1k Ohms unbalanced/1k Ohms balanced
Output Impedance: .15 Ohms from 20Hz to 20kHz
Also available configured for 120W x 4 channels with 25W Class A. When purchased in this higher power
configuration, the amplifier channels cannot be bridged. Any Amplifier V12 can be modified by the factory
to operate at the 120W per channel (bridgeable) or 400W per channel (non-bridgeable). Contact the
factory for specific details or to discuss the proper configuration for your V12.
SUPPLY 1600 VA toroidal power transformer and 144,000 uF of capacitance
DIMENSIONS
Height: 5.25" Faceplate, 6.0" Overall
Width: 19.0" Faceplate, 17.0" Chassis
Depth: 12.5" Overall
Weight: 45 lbs., 50 lbs., Shipping
Power requirement: 450 Watts maximum at rated power