Da-Lite Tensioned Contour Electrol - Manual (Page 2)

PROJECTION
DA-LITE SCREEN CO ., INC.
SCREENS
115 V AC 60 HZ
MODEL # 242H PART # ORDER #
DROP ROLLER LENGTH CUSTOM SIZE VA
DATE OF MF G.
MINIMUM BRANCH CIRCUIT CONDUCTOR AMPACITY FOR CONNECTION, MAXIMUM BRANCH CIRCUIT OVERCURRENT PROTECTIVE DEVICE RA TING TO BE PROVIDED, 20A WARSA W, INDIANA 46581 MADE IN U.S.A. MADE BY
96863 FABRIC
in. in. in. AMP
DUTY C YCLE 1 MIN . ON / 3 MIN . OFF
PROJECTION
DA-LITE SCREEN CO., INC.
SCREENS
115 VAC 60 HZ
MODEL #
242H
PART #
ORDER #
DROP
ROLLER
LENGTH
CUSTOM
SIZE VA
DATE
OF MFG.
MINIMUM BRANCH CIRCUIT CONDUCTOR
AMPACITY FOR CONNECTION,
MAXIMUM BRANCH CIRCUIT OVERCURRENT
PROTECTIVE DEVICE RATING TO BE
PROVIDED, 20A
WARSAW, INDIANA 46581
MADE IN U.S.A.
MADE BY
96863
FABRIC
in.
in.
in.
AMP
DUTY CYCLE 1 MIN. ON / 3 MIN. OFF
Care and Cleaning 0f Projection Screen Surfaces
For additional assistance, please contact
Da-Lite’s Sales Partners with the following
information: type of stain, fabric type and date
of purchase.
Use a blotting action rather
than a wiping action to avoid
damaging the surface.
The screen surface can be
cleaned with water or a mild
soap and water solution. Small marks can be removed
with a cleaning pad such as
Magic Eraser.
Always use a soft, clean, lint
free rag or sponge. Do not scrub the screen or use
petroleum based solvents.
Use compressed air to remove
adhering particles.
AIR
Keep your screen rolled up in
its protective case when not
in use.
Thank you for purchasing the
Da-Lite Contour Electrol.
In this Owner’s Manual, you will find details regarding the general
care and cleaning of the projection surface, terms and conditions
of the Limited Five Year Warranty and information about the
screen which can be used to help identify your particular model.
At Da-Lite, we strive to continually provide you with outstanding
levels of service and the highest quality products available.
For customer service needs, warranty claims or any general
inquiry, please feel free to contact Da-Lite’s Sales Partners at
574.267.8101 / 800.622.3737 or [email protected].
The product label is used to provide you
with complete information about your
projection screen. The label can be found on
your Da-Lite Tensioned Contour® Electrol®
in the location as referenced in the image
below. Please refer to the
Order # and Date
of Mfg. when contacting Da-Lite to make
a warranty claim or to receive general
information about your projection screen.
Locating the Product Label