Da-Lite Picture King - Manual (Page 3)

3
Closing The Screen
Protect Your Screen
1. Return screen case to original central position on center tube.
2. Hold extension tube firmly. Pull out top Black Locking Knob
and lower extension tube to bottom position.
3. Unhook screen pull bail and complete re-rolling fabric
into case.
4. If Keystone Eliminator has been used, simply raise it
to a perpendicular position and push it back into the
extension tube.
5. Swing case to vertical position. Note that fabric locks in.
6. Set tab on hanger in opening of case end cap. As extension
tube locks, the case also is locked.
7. Place tip of middle finger of right hand in depression beneath
leg bracket. Lift leg bracket sharply, at the same time applying
a slight lift to entire unit with left hand.
NOTE that legs are
closed and locked, hanger, and extension tube and case are
locked and surface is locked to provide for safe and
comfortable carrying and storing.
Before re-rolling surface into case, examine both front and
back of surface to be sure they are free of foreign matter.
A Da-Lite Screen carrying case is a wise and economical
investment.
IMPORTANT NOTE:
Use no more tilt than necessary. Use caution in tensioning
screen surface when using Keystone Eliminator. Don't
over-tension!