Da-Lite Floor Model C - Manual (Page 2)

2
Assembling Model C Base
1. Insert two round tubes (3) through end bracket (2) flush with
outside of bracket. Tighten thumb screws (4).
2. Slide center bracket (1) in place on round tubes (3). Tighten
thumb screws (4).
3. Place second end bracket (2) in position at opposite end in
same manner as center bracket (1).
4. Insert assembled tube (11, 12, 13) in socket and lockspring lock.
5. Place screen case in end bracket (2) with slat and D-ring on
top and centered with center bracket (1).
6. Raise screen and hook D-ring into safety-catch of hanger (8).
CAUTION! – Observe the following operating instructions
and mechanical sequence carefully to avoid damaging your
screen. DO NOT RAISE tubing beyond the standard vertical
height of your particular Da-Lite screen.
1 3
2
4
6
7
9
12
5
13
10 8
11