Da-Lite Model B with CSR - Manual (Page 2)

2
Da-Lite wall/ceiling screens may be mounted on a wall, map rail,
suspended from ceiling or extension brackets. Wall screens must
be mounted level and with the case-back parallel to the wall.
For Wall Mounting
Use the keyhole slot at the back of the hanging bracket for flush
wall suspension. Position screws or other fasteners into the wall
and hang screen by using the slots.
For Map Rail Mounting
Use keyhole slots in flat brackets. Do not use “D” rings.
For Ceiling Suspension
If the screen is to be ceiling mounted, two screw hooks should
be placed in a beam or other solid surface. For drop ceilings,
Da-Lite’s T-Bar Clips may be purchased.
Care in mounting and care in correct operation will mean a long
and satisfactory life for your Da-Lite wall/ceiling screen. Locate
the screen where the audience can best see it and where other
furnishings in the room permit. Mount the screen so that bottom
of picture surface, when fully extended, will be above the heads
of viewers.
Built-In-Hangers Installation
Protect Your Screen by keeping it rolled in its protective case
when not in use. Always examine both front and back of surface
before re-rolling into case to make certain screen is free of dust,
dirt or other foreign matter. Use a very soft duster to gently
remove any foreign particles.
For
Wall
For
Ceiling