Da-Lite Background Stand System - Manual (Page 2)

Set-Up Instructions
Care Instructions
Pull out tripod legs of each upright and set securely on flat surface far enough
apart to accommodate the roll of seamless or the background to be used.
Extend crossbar to correct length, run through core of the background and drop
into place. Adjust columns with Safe-Lock clutch collars (or Spring-Lock device
on BGS Model) to required height.
When using multiple rolls (DL/BG only), secure BG-A attachments to inner
column tube before putting first roll in place.
Da-Lite Background Stands require minimum care. If required, they may be
washed in a mild soap and water solution. Abrasive cleaners should be avoided
as they may scratch the tubing.
Accessories
Wall Mounted Background Supports
Model BG-M1 consists of two 4½ inch diameter
aluminum castings, each with a 3⁄8 inch x 21⁄4 inch long stud
to support an optional crossbar. May also be used
as a light mount.
Model BG-M2 features a pair of satin anodized
aluminum wall mounts and two sets of
attachments (BG-A) to accommodate optional
crossbars. Optional third set may be added.
BG-A Attachments
The BG-A attachments accommodate a second or third
roll of paper on the DL/BG Background Stand, on the
BG-M2, wall mounted background support or on any
7⁄8 inch tubing. When used on the stand, it makes the
ideal unit for location portrait work where a choice of
color or painted backdrops is desirable.
Crossbars
Fabricated of heavy-duty 11⁄8 inch and 1 inch aluminum tubing.
Sections are permanently locked together, will not pull apart.
Model 2-CB Two Section Crossbar
Extends 63 inches to 116 inches.
Model 3-CB Three Section Crossbar
Extends 56 inches to 151 inches.