Chenbro MPEG4 - Manual (Page 62)

62
dihigh < not required > set DI high as trigger condition
dilow < not required > set DI low as trigger condition
dirise < not required > set DI rising as trigger condition
difall < not required > set DI falling as trigger condition
motion1 < not required > set motion window1 as trigger
condition
motion2 < not required > set motion window2 as trigger
condition
motion3 < not required > set motion window3 as trigger
condition
ioalarm < not required > trigger DO when DI condition
matched
mdalarm < not required > trigger DO when motion detected
ioupload < not required > upload snapshot when DI condition
matched
mdupload < not required > upload snapshot when motion
detected
sinter <integer> seconds interval for sequential mode
sbegin <hh:mm:ss> time to start sequential mode
send <hh:mm:ss> time to stop sequential mode