DCS BQAR36 - Manual (Page 2)

Summer 2008 39
36” Grill Dimensions (with optional grill cart)
Grill Model: BGB36-BQAR
Cart Model: CAD-36
MODEL NUMBER BGB36-BQAR
TOTAL COOKING AREA 879 SQ. INCHES
PRIMARY COOKING AREA (GRILL AREA) 638 SQ. INCHES
SECONDARY COOKING AREA (WARMING RACK) 241 SQ. INCHES
GRILL BURNERS 3 @ 25,000 BTU/HR
INTEGRATED ROTISSERIE BURNER 14,000 BTU/HR
SMOKER BURNER 3,500 BTU/HR
DOUBLE-SIDED GRILL GRATES STAINLESS STEEL
GREASE MANAGEMENT SYSTEM ® ✔
SHIPPING WEIGHT (GRILL HEAD) 284 LBS.
SHIPPING WEIGHT (OPTIONAL CART) 115 LBS.
SHIPPING DIMENSIONS (HEIGHT X WIDTH X DEPTH) 31” X 40” X 31-1/2”
36” Grill Island Preparation
Grill Model: BGB36-BQAR
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4” W.C.
• Supply Pressure: 6" to 9” W.C.
Propane
• 1/2" NPT male with a 3/8" flare adapter
• LP hose with a quick disconnect & fitting are shipped
connected
• Operational Pressure: 10” W.C.
• Supply Pressure: 11" to 14” W.C.
Power Requirements:
• 120V 60Hz for models with Rotisserie Motor.
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Grill Placement:
DO NOT build grill under overhead unprotected combustible
construction. Use only in well-ventilated areas. These units are
for outdoor use only. If located in a consistently windy area
(oceanfront, mountaintop, etc.) a wind break will be required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your
dealer.
Accessories
• Stainless Steel Grill Cart (CAD-36)
• Single or double side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Grilling Tool Set
• Brazilian Cherry Chopping Board that fits in cart side-shelf
• Drop-on Griddle Plate
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
access doors
(ADN20x36)
access drawers
(ADR 36)
Max.
4” x 4” opening for
gas supply line
Note: Locate electrical
service on the right hand
side for rotisserie motor
connection.
3” to non-combustible
construction/
min. for lid clearance
12” min. combustible
construction
BGB36-BQAR
* Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
Island installation to use minimum of 3 vents providing
10 square inches per vent (typical).
Vent Vent
Vent
We encourage you to find out more about these features and learn how they
can make your cooking experience more enjoyable by visiting our learning
page at: www.dcsappliances.com.
Because of continuing product improvement these specifications are subject
to change without notice.
magalog summer 2008.2.qxd 4/24/08 2:05 PM Page 39