Features, Installation instructions – Danby DUFM085A2WP1 User Manual

Page 4

Advertising
background image

2

FEATURES

1) THERMOSTAT DIAL: For controlling the

temperature inside the freezer. Turns the motor
on as soon as the temperature rises above the
desired level.

2) FREEZER SHELVES: 3 full width

freezer shelves.

3) MAGNETIC GASKET: Tight fitting door seal

keeps all the cooling power locked inside. No
hooks or latches.

4) DOOR BINS (4)
5) DRIP TRAY

Remove exterior and interior packings, wipe the outside thoroughly with a soft dry cloth and the inside with a

wet, lukewarm cloth. Avoid placing the cabinet in a narrow recess or near any heat source, direct sunlight, or

moisture. Let air circulate freely around the cabinet. Keep the rear of the freezer 5 inches away from the wall.

Location:

1) Select a place with a strong, level floor.

2) Allow 5 inches of space between the back of the freezer and any adjacent wall.

3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating. Heat sources nearby will

cause higher electricity consumption.

4) Avoid very moist places. Too much moisture in the air will cause frost to form very quickly on the

evaporator, and your freezer will have to be defrosted more frequently.

INSTALLATION

INSTALLATION INSTRUCTIONS

Advertising