DaySequerra iLC2ST - Manual (Page 18)

18
iLC2ST User Manual
5. Indicates the current measurement displayed in Field #1. Entering Channel selection mode
in this field allows the user to toggle thru Max SL, Max ML, Infinite Average, True Peak, Max
True Peak and LRA.
6. ‘Stereo A or B’ - Play / Stop / Reset Infinite Average icon. Selecting this icon while on the
Home screen and ‘pressing’ SELECT will ‘stop’ the Infinite Average. Pressing SELECT
once again will ‘reset’ the Infinite Average. Pressing SELECT once more will ‘play’ and
resume calculations for determining the Infinite Average for the selected display input.
7. ‘Stereo A or B’ - Pause / Resume Infinite Average icon. Selecting this icon while on the
Home Screen and ‘pressing’ SELECT will ‘pause’ the Infinite Average. Pressing SELECT
once more will ‘resume’ calculations for determining the Infinite Average for the selected
display input.
8. ‘Stereo A or B’ - Loudness Control Icon. Select to enter Loudness control submenu.
Auto Infinite Average
Turns the infinite average on an off when an inbound audio signal is below the selected threshold. The
default threshold is -60 LKFS. Any inbound audio below (-60 LKFS) for longer than 400 Msec will stop
the Infinite Average. It will hold that calculation in memory and display it on the Home Screen until an
inbound audio signal that is greater than the threshold (-60 LKFS) is detected for longer than 400 Msec.
The ‘STOP’ icon is displayed when the Infinite Average is stopped. The infinite average will then reset
itself and begin calculating again.
If Auto Infinite Average is enabled the Home Screen will display ‘Auto Inf Avg’ in place of ‘Infinite Avg’.
The Threshold range can be set from 0 to -99 LKFS. If Auto Infinite Average is not enabled, Threshold
is not selectable.
A Time Limit can be set to trigger the Auto Infinite Average ‘ON’ and ‘OFF’. 100 – 3000 Msec.
Defaulted to 100 Msec
Loudness Meter Algorithm Settings
Figure 2. Loudness Meter Algorithm Settings menu screen display