Q-See QSD004C4-250 - Manual (Page 13)

- 10 -
QSD004C4-250 User’s Manual
5.12 Miscellaneous Menu-Time Set
5.13 Hard Disk Set
TIME SET
∨
2008/08/08 20:08:08
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
HARD DISK SET
OVERWRITE ENABLED [YES]
HDD SIZE 120042MB
HDD USED 80865MB 77%
HDD FORMAT
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
Configure system date and time:
[ Up] and [ Down]: move the cursor
[ SEL]: modify the value
[
Menu]: exit and save
OVERWRITE ENABLED:
If you choose “YES”, recording
continues and overwrites oldest
previous recordings when the hard
drive is full.
If you choose “NO", the
recording process will stop when the
hard drive is full.
HDD SIZE:
Indicates the total capacity of the hard drive installed in the DVR.
HDD USED:
Indicates the space used on the hard drive and the percentage of hard drive
space being used.
HDD FORMAT:
If you format the hard drive it will erase all the data on the hard drive.
You need to input your password when you want to format the HDD.
Note:
When you install a new hard drive in the DVR you use this function to
format the hard drive.