Delkron Twin Ca 107 - Manual

1
Part# D3302 & D3303
107ci TOP E D KIT
I STALLATIO I SRTUCTIO S
Please read all of the instructions BEFORE you start your DELKRO
107ci top end kit installation. A few extra minutes now will pay dividends
later! If after reading these instructions you do not feel comfortable making
the necessary modifications, PLEASE contact a knowledgeable shop or
engine builder to perform this work for you.
STEP # 1 - Disconnect the battery, Fuel Line(s), Oil lines.
STEP # 2 - Drain all fuel from gas tank and remove gas tank.
STEP # 3 - Remove engine from chassis per service manual instructions.
STEP # 4 - Completely disassemble engine per service manual instructions
STEP # 5 – Crankcase machining … Cylinder studs MUST be removed for
this operation