Deltech Fitness HG935- Ultimate Lat Machine - Manual (Page 25)

ASSEMBLE THE ARM MOUNT (A) AND THE SWIVEL PULLEY MOUNT BRACKET (D) TO
THE FRONT SUPPORT OF THE LAT MACHINE USING THE M10 x 75MM BOLTS (R), M10
FLAT WASHERS (W) AND M10 LOCK NUTS (AA)
NOTE: THE NUTS USED ON THIS PRODUCT ARE LOCK NUTS SO YOU MUST USE A WRENCH TO TIGHTEN
THE BOLT. THE BOLT MUST GO THRU THE PLASTIC INSERT IN THE NUT.
TOOLS REQUIRED:
WRENCHES OR METRIC SOCKET SET
ARM & PULLEY MOUNT INSTALLATION
FRONT OF MACHINE
D
R
W
W
AA
A