Deltech Fitness DF9500- Flat/Incline/Decline Bench - Manual (Page 8)

N
T
V
V
X
NOTE: YOU MUST TIGHTEN
THE BOLTS BETWEEN THE
SEATS ENOUGH TO
ELIMINATE ANY WOBBLE
IN THE SEAT.
SEAT ASSEMBLY
LEG HOLDDOWN
ASSEMBLY
LEG HOLD DOWN & SEAT INSTALLATION
ATTACH THE SEAT ASSEMBLY TO THE FRAME ASSEMBLY USING M12 x 76MM BOLT (T), M12
FLAT WASHERS (V), AND M12 LOCK NUT (X). (* NOTE THE TIGHTER YOU MAKE THE BOLT,
THE MORE SECURE THE BENCH WILL BE.)
INSERT THE LEG HOLD DOWN ASSEMBLY INTO THE FRAME ASSEMBLY AND SECURE IT WITH
THE PULL PIN.
MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEM PERIODICALLY
TO MAKE SURE THEY ALWAYS STAY TIGHT.