Deltech Fitness DF820L- Squat Rack with Lat Attachment - Manual (Page 11)

TOOLS REQUIRED:
METRIC WRENCHES OR SOCKET SET
ATTACH THE BOTTOM SUPPORT (B) TO THE BOTTOM CROSSMEMBER OF THE POWER
RACK OR SMITH MACHINE YOU ARE INSTALLING TO USING M12 x 75MM BOLTS (S), 4”
FLANGE PLATES (J), M12 WASHERS (W) AND M12 LOCKNUTS (V). TIGHTEN SECURELY.
INSTALL RUBBER SHOE (K) TO BOTTOM SUPPORT (B).
FRAME ASSEMBLY
(NOTE: THE NUTS USED ON THIS ARE
LOCKNUTS, THIS MEANS YOU MUST
TIGHTEN THEM DOWN PAST THE
PLASTIC INSERT.)
K
B
S
W
W
V
J