Deltech Fitness DF5100- 6 Pair Vertical Dumbbell Rack - Manual (Page 3)

NOTE: DUE TO THE WELDING PROCESS THE
LEGS ON THE TOP PIECE MAY DRAW
SLIGHTLY. TO ASSEMBLE PUT ALL 3 BOLTS
ON ONE SIDE. THENPULL THE OTHER LEG
OUT AND INSERT THE OTHER BOLTS.
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533
TOOLS REQUIRED:
WRENCHES OR METRIC SOCKET SET
FLAT HEAD SCREWDRIVER
ASSEMBLE THE BOTTOM PLATE (B) TO THE TOP FRAME (A) USING THE 1/4”
BOLTS (C) AND THE 1/4” NUTS (D).
MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK
THEM PERIODICALLY TO MAKE SURE THEY ALWAYS STAY TIGHT.