DICE Electronics DOU Mini Cooper - Manual (Page 12)

12
Connection diagram for DSP option
connect to
module
connect to car
3-pin connector
connect to 12V+
switched power
and ground
BMW Interface Harness (12ft.) RCA/6-PIN DSP Harness
Power Cable
connect to car
coax connector
DSP
Converter
BMW vehicles with Digital Signal Processing (DSP) must use the DSP Kit (PN: ACC-BMW-DSP). To confirm
if the vehicle has DSP, check for a bare metal coax cable and a 3-pin connector (for connector locations see
page 13). DSP was only an option on some BMW 5-Series, 7-Series, X5, Z4 and X3 vehicles.