DICE Electronics MediaBridge MB-1500 Honda - Manual (Page 15)

15
Basic operation
Accessing the MediaBridge as the audio source:
Much like the radio’s AM/FM tuner, satellite radio or CD audio sources, the MediaBridge is integrated to
be part of the vehicle’s audio system. To access the MediaBridge source, press the SAT/XM button (if SAT
emulation is set) or DISC button (if CDC emulation is set) on the radio. Pressing this button repeatedly will
cycle through sources present in the vehicle (CD > MediaBridge).
MediaBridge source selection:
The MediaBridge adds additional audio sources including USB iPod/Memory, auxiliary audio input*, SIRIUS
Satellite Radio* and Bluetooth. To cycle between these sources, use the SEEK, TRACK or TUNE buttons
within the first 5 seconds of accessing the MediaBridge as the audio source.
*These sources require additional parts/accessories/service from DICE and/or third parties.
MediaBridge Interface settings (within first 5 seconds of accessing it as the audio source):
Select DISC/PRESET 1 to apply settings and resume audio playback.
Select DISC/PRESET 3 to change default volume level; use track up/down to adjust between Min and Max.
Select DISC/PRESET 4 to enable/disable scrolling text. (SAT emulation only)
Select DISC/PRESET 6 to view MediaBridge serial number and firmware version. (SAT emulation only)
DISC 2 and 5 have no settings available.