DICE Electronics MediaBridge MB-1500 BMW - Manual (Page 8)

8
The following DIP switch settings are used to configure the MediaBridge module to interface with
the various vehicle radios. Before installation, set the DIP switches to the position shown for the
corresponding radios.
DIP switch settings for BMW/Mini
Car configuration switches
For single line (Non-
Navigation) radios in Mini,
3-Series, Z3, Z4, and X3
models.
BMW
Business CD Radio
BMW & MINI
16:9 Navigation Radio
BMW 4:3
Navigation Radio
BMW MID Radio
For 16:9 (wide screen)
Navigation radio system
in BMW and Mini.
For 4:3 (small screen)
Navigation radio system
in BMW.
For single line (Non-
Navigation) radios in
5-Series, 7-Series, and
X5 models.
OFF OFF
ON
OFF
ON ON
OFF
ON
Radio specific text field configuration should be performed during installation. Please refer to
interface setting (DISC 5) section on page 19.