Digiframe DF-SC5701 - Manual (Page 8)

- 4 -
Press POWER button for 0.5 second to switch scanning
resolution between 300dpi and 600dpi.
GREEN LED = 300dpi
ORANGE LED = 600dpi
3.2 Scan an original
„ Insert your photo into the plastic sheath supplied with the
scanner. (The detailed usage of the plastic sheath is described
in the section 3.3.)
„ With the side to be scanned FACING UPWARD and align your
photo to the far LEFT EDGE of the feeding slot as indicated.
Simply let go of the original when it begins to feed into the slot.
„ When the scan is completed, the scanner will automatically
create a folder with its subfolder titled “DCIM\100Photo” on
your memory card or flash card, which will hold the first 9999
scans. Then “DCIM\101Photo” folder will be created for the
next 9999 scans, and so on.
(Each scanned image is given a file name with the prefix IMG
followed by an underline and a 4- digit sequential number in
the order the images are stored. For example, IMG_0001.jpg,
IMG_0002.jpg, etc.)
Note:
z Do not remove the memory card/USB flash drive or
disconnect the power supply while the indicators are blinking
after each scan.