Ditch Witch JT922 - Manual (Page 94)

JT922 Operator’s Manual
Systems and Equipment - 93
Anchor System
CMW
Anchor System
Crushing weight. If load falls or moves, it could kill or crush
you. Use proper procedures and equipment or stay away.
NOTICE:
• Drive anchors properly before drilling.
• Stand on platform when operating anchor controls.
• Wear high-top protective boots with legs of pants completely tucked inside.
• Wear protective gloves.
• If you are not driving two anchors to full depth, drive optional ground rod into soil away from drilling
unit and connect ground rod to drilling unit.
Turning shaft can kill you or crush arm or leg. Stay away.
NOTICE: Do not replace anchor collar bolt with one longer than original. Clothing could
catch on turning shaft.