Service precautions, Welding precaution, Washing precaution – Ditch Witch JT20 User Manual

Page 157: Jt20 operator’s manual, Welding precaution washing precaution

Advertising
background image

Service - 156

JT20 Operator’s Manual

Service Precautions

CMW

®

Service Precautions

Welding Precaution

Washing Precaution

Incorrect procedures could result in death, injury, or property damage.

Learn to use equipment correctly.

NOTICES:

•

Unless otherwise instructed, all service should be performed with engine off.

•

Refer to engine manufacturer’s manual for engine maintenance instructions.

Explosion possible. Serious injury or equipment damage could occur.

Follow directions carefully.

To help avoid injury:

•

Disconnect battery to prevent damage to battery. Do not turn off battery disconnect switch with
engine running, or alternator and other electronic devices may be damaged.

•

Connect welder ground clamp close to welding point and make sure no electronic components are
in the ground path.

•

Always disconnect the electronic control module (ECM) ground connection from the frame, harness
connections to the ECM, and other electronic components prior to welding on machine or
attachments.

NOTICE: Water can damage electronics. When cleaning equipment, do not spray electrical components
with water.

Advertising