Using drill string guide – Ditch Witch RT Line User Manual

Page 59

Advertising
background image

Drill - 58

RT12/RT16/RT20/RT24 Operator’s Manual

Drill

CMW

Using Drill String Guide

Use drill string guide to align drill string as it
enters the soil. When using drill string guide,
follow these guidelines:

•

Use only approved Ditch Witch drill string
guide (p/n 179-737).

•

Stand only on the left side of the approach
trench.

•

Keep drill string guide at least 3’ (1 m)
behind bit.

•

Use drill string guide to control only the first
5’ (1.5 m) of the bore path.

•

After drilling 5’ (1.5 m), stop unit and
remove drill string guide.

•

Do not use drill string guide during
backreaming or any time the drill string is
being pulled back.

Turning shaft will kill you or crush arm or leg. Stay away.

NOTICE:

•

Keep everybody at least 10’ (3 m) away from drill rod during operation. Do not straddle trench or
drill rod while drilling.

•

To align drill rod when starting a bore, use a guide. Guides are available from your Ditch Witch
dealership.

Advertising