Ditch Witch RT120 Q - Manual (Page 175)

Service - 174
RT120Q Operator’s Manual
500 Hour
Change Fuel Filters
Change fuel filters (shown) every 500 hours.
Change Hydraulic Fluid and Filter
Change hydraulic fluid and filter every 500 hours.
Change hydraulic fluid and filter every 250 hours
if jobsite temperature exceeds 100°F (38°C)
more than 50% of the time.
To change:
1. Remove drain plug (1).
2. Drain fluid and replace plug.
3. Change filter (2).
4. Add THF at fill (3).
Test Coolant Freeze Protection Level
With engine cool, test coolant freeze protection
level using a hydrometer or refractometer.
Recommended freeze protection level is -34°F
(-37°C). Adjust as needed.
If colder temperatures are expected, consult your
Ditch witch dealer or coolant supplier.
Use pre-dilluted coolant to maintain proper freeze
protection.
IMPORTANT: See page 152 for information
on approved coolants.
t37om030w.eps
t37om031w.eps
1
2
3
t37om019w.eps