Ditch Witch 150RT - Manual (Page 23)

Controls - 22
150R/T Operator’s Manual
Receiver
CMW
Perform Self Test
Receiver performs self test to detect errors.
1. Enter Setup Menu, see “Setup Menu” on
page 20.
2. Press Down Arrow to highlight Self Test.
3. Press Menu to perform a self test.
4. Turn off all beacons and transmitters.
5. Press any key to begin test.
6. Receiver will display self test results.
• If receiver finds no errors, it will display “All channels passed. Press any key . . . .”
• If receiver detects errors the operator can resolve, see “Receiver Error Messages” on page 46.
IMPORTANT: Do not move receiver during test.