Dr. Brown's Deluxe Bottle Sterilizer - Manual (Page 6)

TO CLEAN THE APPLIANCE:
The Dr. Brown’s Natural Flow ® Deluxe Bottle Sterilizer should be cleaned at least once
a week when in regular use. Wait at least 60 minutes after a sterilization cycle to allow
the devise to cool. Before cleaning your device ALWAYS disconnect the power plug
from the outlet.
• The removable divider, removable basket, tongs and measuring cup can be cleaned
in hot soapy water and rinsed completely.
• The base exterior and heating chamber and two covers can be cleaned with a damp
sponge or damp cloth.
NOTE: DO NOT IMMERSE THE STERILIZER BASE IN WATER.
TO CLEAN THE HEATING ELEMENT:
Mineral deposits may form on the metal heating element beneath the grill in the
bottom of the heating chamber. It is important to de-scale this appliance every
4 weeks to ensure that it continues to work properly.
• Unplug the device.
• Remove the divider and basket.
• De-scale utilizing a 2:1 ratio -- mix 1 oz of white vinegar with 2 oz of cold water and
pour directly over the heating element.
• Turn the unit on and run until the mixture is evaporated and any scaling has
been removed.
NOTE: DO NOT USE HARSH ABRASIVES OR SOLVENTS TO CLEAN THE HEATING
CHAMBER OR HEATING ELEMENTS AS THEY MAY CAUSE PERMANENT DAMAGE.
PLEASE ENSURE PROPER VENTILATION WHEN DESCALING WITH VINEGAR.
6