Dr. Brown's Double Electric Breast Pump - Manual (Page 9)

DISASSEMBLY
Follow these steps to disassemble the Collection Units for cleaning:
Then remove the Bo le Seal from the
underside of the Connector. First loosen and remove the Collection
Bo le from the Connector.
With the Cap in hand, pull the Sealing
Insert downward to dislodge.
To remove the Breastcup, gently pull
on the perimeter tabs to separate it
from the Connector. To remove the Cap, simply pull up on
the Cap tab at the back. This will separate
from the Connector.
l l
l l
l
BEGIN FULL-LENGTH INSTRUCTIONS