Dr. Brown's Manual Breast Pump - Manual (Page 3)

3
DISASSEMBLY
Follow these steps to disassemble your pump for cleaning.
Loosen and remove Bottle from
Connector. Remove the white Valve from
underneath the Connector. Remove Breastcup by gently
pulling on the perimeter tabs.
Remove Cap assembly by pulling
up on the Cap tab at the back of
the pump. Remove Handle by pushing the
stem of the Cap Insert upward,
then unhinging to separate. Remove Cap Insert from Cap by
pulling down.
CLEANING
Before your first use and after all other
uses, it is important to wash your pump.
Make sure all pump parts have been
disassembled for cleaning.
All pump parts can be hand-washed or
washed in a dishwasher.
Note: The white Valve and Breastcup are delicate.
Please take extra care in cleaning them. It is
recommended that you hand wash these parts.
Do not use any rough brushes to clean these parts.
TO HAND WASH: Wash
all parts in warm, soapy
water, rinse well and
air dry.
IN DISHWASHER: All
pump parts are top-
rack dishwasher safe.
Completely air dry parts
and let them cool.