Rear panel, Little 40 ii – Dv Mark DV 40 212 User Manual

Page 6

Advertising
background image

6

REAR PANEL

17-18) SEND-RETURN The amp features a series send/return which can be used for connecting with outboard effect processors or pedals.
Simply connect the Send out to your processor’s input, and connect the output of your processor to the Return in.
19) 0/-15 dB SWITCH This switch 0db or -15db allows you to optimize the send level signal to external effects.
20) FSW 1/4” STEREO jack for connecting a DUAL footswitch to switch between Clean and Drive channels and turn ON/OFF the Reverb.
21) SPEAKERS OUTS One 4 ohm, one 8 ohm and one 16 ohm jack are provided for speaker cabinet connections. Verify the impedance of
your speaker cabinet to make sure you connect it to the correct output.
22) AC POWER SOCKET Make sure the unit is grounded; all three terminals of the AC power cord must be connected to avoid any injury
to the user or damage to the unit.
23) VOLTAGE SELECTOR The DV Mark Little 40 II amp, the DV 40 112 and the DV 40 212 combos feature a 120V/240V Voltage Selector
(23) to use the amp in countries with different voltages, so make sure the switch on the rear panel is on the correct voltage before connecting
it to the AC power, and the fuse is the right value for that voltage (This selector is not available on the 100V version).
Please change the voltage/fuse values label located near the voltage selector matching the voltage/fuse values when you need to change the
voltage of the apparatus.

SEND

RETURN

FSW

0 dB

-15 dB

SEND

LEVEL

DO NOT OPERATE THIS

AMPLIFIER WITHOUT

CONNECTING LOUDSPEAKERS

SPEAKER

OUT

TOTAL 4 Ω

OR 8 Ω + 8 Ω

LOAD

8 Ω

LOAD

SPEAKER

OUT

16 Ω

LOAD

SPEAKER

OUT

Model

LITTLE 40 II

CAUTION:

FOR CONTINUED PROTECTION

AGAINST RISK OF FIRE

REPLACE ONLY WITH SAME

TYPE AND RATING FUSE.

ATTENTION:

REMPLACER UNIQUEMENT PAR

UN FUSIBLE DE MEME TYPE.

Ser.Nr.
Date

VOLTAGE

LITTLE 40 II

GAIN

0

MAX

0

MAX

MASTER

BASS

MIDDLE

HIGH

GAIN

0

MAX

0

MAX

MASTER

BASS

MIDDLE

HIGH

INPUT

Ch2

Ch1

CH1

CH2

STAND BY OFF

ON

ON

0

MAX

PRESENCE

0

MAX

REVERB

18

1

2

3

4

5

6

8

9

10

11

12

7

13

14

15

16

17

19

20

8

22

23

Advertising
This manual is related to the following products: