EarthQuake CS3814B - Manual (Page 10)

10
Operator's Manual
CS3814B, CS4116B Chainsaws
Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5
SAFETY DECALS
Reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this
equipment safely and effectively. Several safety labels are placed on the chainsaw to remind you of this important information
when you operate the unit.
These important safety labels are illustrated below, and are shown here to help familiarize you with the location and content of the
safety messages you will see as you perform normal cutting operations. Review these labels now. If you have any questions regard-
ing their meaning or how to comply with these instructions, reread the complete safety instruction text on the preceding pages, or
contact your local dealer.
Should any of the safety labels become unreadable because of being worn, faded, or otherwise damaged during the use of your
chainsaw, use the part number information provided to order a replacement label from your local authorized dealer.
The safety labels are easily applied, and will act as a constant visual reminder to you, and others who may use the equipment. Follow
the safety instructions necessary for safe, effective operation of your chainsaw.
For safe operation and maintenance, additional symbols
are engraved on the machine.
(6) Indicates the port for refueling the
gas/oil mixture.
Location: Near the fuel cap.
(7) Indicates the port to refill the chain
oil.
Location: Near the oil cap
(1) Read operator’s instruction book
before operating this machine.
(2) You must wear appropriate ear, eye,
and head protection.
(3) Use two hands when operating the
chainsaw.
(4) Warning! Danger of kickback.
(5) Read, understand and follow all
warnings.
(8) Indicates the engine operation ON/OFF
switch. Flipping the switch to the “O”
position immediately stops the engine.
Location: Near the rear at the left side of
the rear handle.
(9) Indicates the choke knob location. Pull
out the choke knob and the choke closes;
push in the choke knob and the choke
opens. (Sets High Idle.)
Location: Near the rear at the right side of the
rear handle.
(10) Indicates the oil pump adjustment location.
Turn the rod using a screwdriver and follow
the arrow to the MAX position to increase
chain oil flow. Turning the rod to the MIN
position decreases chain oil flow.
Location: Bottom of the power unit.
(11) Indicates the directions that the chain
break is released (white arrow) and acti-
vated (black arrow)
Location: Front of the chain cover.
(12) Indicates the direction of the saw chain in-
stallation.
Location: Front of the chain cover.