Echelon IzoT NodeBuilder - Manual (Page 90)

Creating a NodeBuilder Project from the New Device Wizard
You can create a NodeBuilder project from the New Device Wizard in the IzoT Commissioning Tool.
To do this, follow these steps:
1. Create or open an IzoT CT network. See the IzoT Commissioning User’s Guide for more
information on creating and opening IzoT CT networks. If you plan on downloading your device
application to a device, make sure that the IzoT CT computer is attached to the network.
2. Drag a Development Target Device or a Release Target Device shape from the NodeBuilder
Basic Shapes 4.00 stencil to your network drawing. Use a Development Target Device if you
are building to a NodeBuilder hardware platform; use a Release Target Device if you are building
to the release hardware. You can drop the shape anywhere, but a good location is just below the
Channel 1 shape on your drawing.
3. The New Device Wizard opens. In the Device Name property, enter the device name, select the
Commission Device check box, and then select the Create New Device Template check box
under NodeBuilder Device Template.
76 Creating and Opening IzoT NodeBuilder Projects