Echelon i.LON SmartServer 2.0 - Manual (Page 308)

i.LON SmartServer 2.0 Programmer’s Reference 19-8
<UCPTmodemPresent>true</UCPTmodemPresent>
<UCPTip852RouterPresent>true</UCPTip852RouterPresent>
<UCPTbootromVersion>4.01.112</UCPTbootromVersion>
<UCPTtransceiverId>TP_FT_10</UCPTtransceiverId>
<UCPTfirmwareVersion>4.01.012</UCPTfirmwareVersion>
<UCPTcpldVersion>74</UCPTcpldVersion>
<UCPThwVersion>3</UCPThwVersion>
<UCPTlonTalkUID0>3 0 0 19 7b 80</UCPTlonTalkUID0>
<UCPTdiskSpareBlocksTotal>94</UCPTdiskSpareBlocksTotal>
<UCPTdiskSpareBlocksMinRec>8</UCPTdiskSpareBlocksMinRec>
<UCPTdiskEraseRateMaxRec>78</UCPTdiskEraseRateMaxRec>
<UCPTprogrammabilityState>PS_REGISTERED</UCPTprogrammabilityState>
<UCPTSoftwareDisabledByDownRevHardware>false</UCPTSoftwareDisabledByDownRevHardware>
</STATIC>
</iLONSystemService>
</SystemService_Read_Info>
The SystemService_Read_Info function returns one <STATIC> item. The following table lists and
describes the properties of the <STATIC> item. Note that all of the <STATIC> item’s properties are
read-only.
Property Description R/W
<UCPTlogTime> A timestamp indicating the time that the static system
information was returned. This timestamp uses the
ISO 8601 format, which is as follows:
YYYY-MM-DDTHH:MM:SS.sssZPhh:mm
r
<UCPTcpuClockRate> The CPU speed (in MHz) of the SmartServer. r
<UCPTtotalDiskSpace> The total disk space available on the SmartServer (in
bytes). The SmartServer hardware has a 64MB flash
disk. r
<UCPTmodelNumber> The SmartServer's model number. r
<UCPTmodemPresent> A flag indicating whether the SmartServer has an
internal modem. r
<UCPTip852RouterPresent> A flag indicating whether IP-852 routing is licensed
on the SmartServer. r
<UCPTbootromVersion> The bootrom version of the SmartServer. r
<UCPTtransceiverID> The channel type of the SmartServer. For free
topology models of the SmartServer, this is
TP_FT_10. For power line models, this is PL_20N
(or PL-20C if CENELEC is enabled). r
<UCPTfirmwareVersion> The firmware version of the SmartServer. r
<UCPTcpldVersion> The CPLD version. r
<UCPTlonTalkUID0> The first of the SmartServer’s 16 Neuron IDs. r
<UCPTdiskSpareBlocksTotal> The total number of spare flash blocks initially
available on the SmartServer. The SmartServer
hardware contains up to 94 spare flash blocks that are r