Resolving problems – Echelon i.LON 1000 Internet Server User Manual
Page 36
32
i
.LON 1000 Internet Serve Starter Kit
Resolving Problems
To the newcomer, the L
ON
W
ORKS
system may appear to be just a device network.
However, beyond the complete implementation of the ISO/OSI 7 layer networking model
lies a very broad technology.
The L
ON
W
ORKS
system includes device networking,network management, development
tools, a variation of the ANSI C programming language, power line communication,
innovative twisted pair transceivers, a network operating system, a data model tailored
for control, IP connectivity, a host of applications that translate, present, and provide
access to the base information carried by the network, and much more.
The breadth of the technology requires that tools such as LonMaker for Windows and
the
i
.LON 1000 Internet Server provide multiple options for getting things done. If you
followed the steps in Chapters 2 and 3, but did not end up with the results you expected,
you may have inadvertently mistyped. Follow the tips below:
1
Reset the
i
.LON 1000.
a) This is accomplished using Hyperterminal by typing factory at the
i
.LON
1000’s
command prompt.
b) Reboot the
i
.LON by typing reboot at the
i
.LON 1000’s command prompt.
c) When the reboot completes you will see that the
i
.LON 1000’s IP address,
subnet mask, and other parameters, have been reset The FTP user name
has been reset to the factory default of “
ilon
” and the FTP password has
been reset to the factory default of “
ilon
”. Any files that you may have
transferred to the
i
.LON 1000 are still intact. Verify that the
i
.LON 1000 has
been reset to factory defaults by typing show at the
i
.LON 1000’s command
prompt.
iLON> show
Software Version: 1.00.00
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Host Name: iLON
Gateway: 0.0.0.0
DHCP: off
MAC ID: 00-D0-71-00-00-26
LonTalk Unique IDs: 80:00:00:00:12:60 through 80:00:00:00:12:6F
LonTalk Xcvr ID: TP/FT-10
LonTalk IP Port: 1628
Config Server: 0.0.0.0 (1628)
Authentication: off
SNTP Servers: 0.0.0.0 (123); 0.0.0.0 (123)
SNTP Synchronized: no
This is the first potential trouble spot. If the
i
.LON 1000’s TCP/IP
parameters are not set properly, it will not be possible for your