Echelon LonScanner FX Protocol Analyzer - Manual (Page 54)

48 Analyzing Packet Log Details
Figure 37. Select Columns Dialog
2. The fields that are currently displayed in the Packet Log are listed in the
Visible Fields list. See the online help for descriptions of these fields. To
change the column position of a field in the log, select the field and click Move
Up or Move Down to move the field. The top field is displayed on the left side
of the Packet Log, and the bottom field is displayed on the right side of the
Packet Log.
To remove a field from the Visible Fields list, select it and click Remove>>.
The field will move to the Hidden Fields list. To add a hidden field to the
Visible Fields list, select it and click <<Add.
Select the Apply to All New Windows checkbox to apply your changes to all
log files that you open during the current LonScanner session. The default is
for all data fields to be displayed.
3. Click OK to save your changes and close the dialog.
Formatting Data Field Columns
You can change the formatting used to display the fields in the Packet Log tab by
performing the following steps:
1. Select View → Format Columns to open the Format Columns dialog, as
shown in Figure 38 on page 49.