Electrocompaniet EC4.6 - Manual (Page 8)

Technical Specifications EC 4.6
The following technical data were measured on randomised test objects and are typical
data. All measurements are made with the following equipment:
Distortion analyser: Tektronix AA501
Oscilloscope:
Tektronix 468
Oscillator: Tektronix SG505
Frequency counter: Rascal 9838
Phase meter:
Hewlett Packard 3575A
Preamplifier section
Single ended operation (gain) 0 dB
Balanced operation (gain) 6 dB
Input impedance 50 kOhm
THD single ended (1 V in / 1 V out) < 0.0013 %
THD balanced (1 V in / 1 V out) < 0.0007 %
Max. input > 10 V RMS
Channel separation (1 V output, 1 kHz) > 90 dB
Output impedance 100 Ohm
Max. output Single ended 8 V RMS
Max output Balanced 16 V RMS
Output noise 400 Hz - 30 kHz input shorted
Single ended : 5 µV
Balanced : 10 µV
Signal / noise > 100 dB
Frequency response 10 Hz - 100 kHz 0.4 dB
Power consumption (no load or signal) 15 W
Dimensions
Width 483 mm / 19 inches
Depth 240 mm / 9.5 inches
Height 70 mm / 2.8 inches
Weight5 kg. / 11 lbs.
The manufacturer reserves the right to alter these specifications without further notice.