Elenco Projects 306-511 - Manual (Page 60)

-59-
Project #501
OBJECTIVE: Display numbers 1 or 4 using the slide switch.
Connect segments B, C, F, & G as shown in the diagram. Turn the
slide switch (S1) off and on, the display changes from numbers 1 to 4.
Hand-Control Display 1 & 4
Project #502
OBJECTIVE: Display numbers 1 or 0 using the slide switch.
Connect segments A, B, C, D, E, & F as shown in the diagram. Turn
the slide switch (S1) off and on, the display changes from numbers 1
to 0.
Hand-Control Display 1 & 0
Project #503
OBJECTIVE: Display numbers 1 or 7
using the slide switch.
Connect segments A, B, & C as shown in the
diagram. Turn the slide switch (S1) off and on,
the display changes from numbers 1 to 7.
Hand-Control
Display 1 & 7
Project #504
OBJECTIVE: Display numbers 1 or 8
using the slide switch.
Connect segments A, B, C, D, E, F, & G as
shown in the diagram. Turn the slide switch
(S1) off and on, the display changes from
numbers 1 to 8.
Hand-Control
Display 1 & 8
Project #505
OBJECTIVE: Display numbers 1 or 9
using the slide switch.
Connect segments A, B, C, D, F, & G as
shown in the diagram. Turn the slide switch
(S1) off and on, the display changes from
numbers 1 to 9.
Hand-Control
Display 1 & 9