Elenco C2D Scope - Manual (Page 10)

Setup Suggestion
Please remember that the C
2 D Digital Microscope can be used in the handheld mode, so make sure that
the work area is free from obstruction and the monitor is viewable.
Controls
Learning the C
2 D controls
Once you have the C 2 D software installed and running, you can use the controls to focus, change
magnification and capture picturess/movies.
U
SING THE C
2
D
D
IGITAL
M
ICROSCOPE
U
SING THE C
2
D
D
IGITAL
M
ICROSCOPE
Focus Knob
Revolving Turret Ring
Shutter Button
Focus Adjustment
Color Filter / Aperture
8
Focusing – 1. Focus the image on the screen with the focusing knob.
2. You should be able to see the image become closer or further away as the focus knob
is adjusted very slowly.
NOTE : This image on the screen will have a delay. Turn the focus knob slowly and wait for the
image to refresh before adjusting again.
Changing Magnification – Change the magnification of the image by turning the Revolving Turret Ring.
Changing Color Filter – Different specimen effect can be displayed by rotating the Color Filter/Aperture.
Taking Images – Images on the screen can be captured (recorded) by pressing the Shutter Button.
Lighting – The light can be turned on or off through the software.