Dixon SPEEDZTR ZTR 44/968999538 - Manual (Page 42)

42
CARE AND MAINTENANCE
DECK REMOVAL
1. Place cut height pedal in lowest cut position.
2. Remove deck drive belt from engine pulley.
3. Release spring from trailing rod (2 places). Remove
hairpin cotter from the other end of trailing rods
(2 places) and detach rods from deck.
4. Remove hairpin cotter from top of front L-Rods
(2 places) and detach L-Rods from lift arms.
5. Remove hairpin cotter from top of rear L-Rods
(2 places) and detach L-Rods from lift arms.
6. Carefully raise and support front of chassis. Slide mower
deck to either side for removal. (Reverse procedure to
reinstall deck assembly.)
— Fig. 13 —