Elenco Snap Circuits SnapMicro I Deluxe &reg - Manual (Page 46)

45
Open the program editor and make the following flowchart and program –
Download the program and then turn off the micro-
controller and move the serial input cable as shown on
next page. Open the terminal window (F8). Turn the micro-
controller on and the first song should play. The LED will
flash in time with the music. Adjust the loudness control for
best level.
Enter the song number 0-3 and click the
Send button. The message “Press Pushbutton to hear
Song” will appear in the Terminal Window. Press the
pushbutton on the snap circuit board and the song you
picked should play.