EMM Labs TSDX CD/SACD TRANSPORT - Manual (Page 16)

016 Appendix A - Serial Remote Control (RS232)
Commands to the TSDX (cont`d)
pol Toggles polarity inversion performed in the digital domain.
Status bytes sent from TSDX
The TSDX sends back 9 Bytes terminated with a <CR> whenever any status changes.
<Byte 0><Byte 1><Byte 2><Byte 3><Byte 4><Byte 5><Byte 6><Byte 7><Byte 8><CR>
Byte 0 Seconds ones in ASCII
Byte 1 Seconds tens in ASCII
Byte 2 Minutes ones in ASCII
Byte 3 Minutes tens in ASCII
Byte 4 Hours ones in ASCII
Byte 5 Track number ones in ASCII
Byte 6 Track number tens in ASCII
Command Function
dim Toggles through display brightness settings
try Tray open and close
tr(x) tr followed by a single digit (x) to jump to a particular track. See example.
tr(x) example:
a) Jump to track 5 : tr0<CR>, tr5<CR>
b) Jump to track 12 : tr1<CR>, tr2<CR>
© 2012 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
TSDX CD/SACD TRANSPORT OWNER’S MANUAL