ENMET RECON/4 - Manual (Page 5)

RECON/4 ENMET Corporation
3
2.2 RECON/4 Display Features
See Figure 2 for location of display features.
Color LCD, Display Item Function
①
Time
②
Quadrant Gas Data, color coded
③
Battery status
④
Gas Type, each quadrant
⑤
TWA or STEL alert
⑥
Gas Measurement, each quadrant
⑦
Unit of Measure, each quadrant
⑧
High or Low Alarm Indication
Figure 2: RECON/4 Display
2.3 RECON/4 Pushbutton Function
Pushbutton Function
Turn on: Press and hold for 1second, the RECON/4 is power on.
Turn off: Press and hold for more than 3 seconds, the RECON/4 is power off.
Audio: When in alarm, press it once and the audio will silence.
Vibration: When in alarm, after audio alarm is silenced, press it once and
vibratory alarm will stop.
RECON/4 status: When the RECON/4 is on, press it to check max gas level,
min gas level, STEL, TWA, current time, serial number and version number.
Calibration: See Section 4.0 .