0 technical data – ENMET SMARTLOGGER User Manual
Page 17
SMART LOGGER
ENMET Corporation
11
6.0 Technical Data
6.0 Technical Data
Manufacturer:
OLDHAM FRANCE S.A.
Function:
Single oxygen or toxic gas detector with interchangeable SMART BLOCK
Type:
SMART LOGGER
Case:
ABS, shock proof
Configuration:
Oxygen or one toxic gas, interchangeable sensors
Detectable gases:
Refer to table, Section I
Auto zero:
If requested at turn on, and when the charger is connected.
Measurement:
Continuous
Sensor:
Interchangeable SMART BLOCK
Display:
LCD (with backlight when initiated)
Sensor fault:
Continuous alarm
Battery fault:
Displayed, audible and visual alarm
Alarms:
Oxygen: 2 instantaneous thresholds
Toxic: 1 instantaneous threshold
1 TWA threshold
1 STEL threshold
Audible and visual alarm, concentration displayed on screen
Output:
(option) - On serial printer for events Speed: 9600 Bauds, 8 bits, parity pair, 1 stop bit, protocol
XON/XOFF
- On PC: maintenance and supervision software SMARTCOM, data bases, LOTUS, EXCEL
Earphone:
(option) Characteristics defined in the certification
Inductance < 1.5 µH
Capacitance < 0.8 µF
Power supply:
9V DC primary cell or rechargable battery
Mounting:
In the pocket or on the belt with clip
Autonomy:
100 h with primary cell, 24 h with rechargeable battery
Weight:
210 g. Dimensions : 130 x 61 x 43 mm
Warranty:
12 months
Certification:
CENELEC Ex EEx ia IIC T4
Specification subject to change without notice.