ENMET MX-48 - Manual (Page 7)

MX48 C ONTROL ENMET Corporation
3
3.0 Installation 3.0 Installation 3.0 Installation 3.0 Installation
3.1 Installation Recommendations
The MX48 C ONTROL can be installed anywhere away from an explosive atmosphere. It should preferably be located
in a ventilated area under surveillance such as a, guard post, control room, instrumentation room, etc.
N OTE : To be able to fully open the hinged front cover of the MX48 C ONTROL , allow space for opening by rotating the
cover 90 degrees upwards see Figure 1.
The MX48 C ONTROL is mounted on the wall with one bracket attached to the wall and the mating bracket is on the
back of the enclosure. See Figure 2
Figure 2: Mounting MX48 C ONTROL
19.75 ″
12.50 ″
3.75 ″
.37 ″
17.50 ″ 17.50 ″ 1.12 ″ 1.12 ″
1.12 ″
3.56 ″
.25 ″ .25 ″
16.12 ″ 16.12 ″
4.93 ″
.62 ″
8.87 ″
.5 ″
.31 ″
Mounting
Bracket
Mounting Bracket
Front View Front View
Back View