Directed Electronics MAXX3 - Manual (Page 22)

®2002 Directed Electronics, Inc. 22
When Auto-rearm and lock is used in conjunction with the passive
arming feature (i.e. both are turned ON) the following will occur:
■ If after driving you turn the ignition off and exit the vehicle by
opening and closing a door, the system will passive arm but NOT
lock the doors in case you have left your keys inside the car.
■ If the alarm is disarmed or AutoImmobilised only and you
open and then close a door, the system will passive arm but
NOT lock the doors, again in case you left your keys inside.
■ If you disarmed the alarm but did not open a door, the sys-
tem will auto-rearm and lock the doors.* As you did not open
a door the system assumes you are outside the vehicle and
the keys are not inside.
* Requires connection to the vehicle’s existing central locking system.
For the ultimate in security and convenience, the system is pro-
grammed to automatically lock your doors when the ignition key
is turned ON or the engine is started*, and will unlock when the
ignition key is turned OFF. This feature can be programmed ON or
OFF. (See the Programming Table for System Features section of
this guide.)
NOTE: If this feature is turned on and you need to open a door to let
someone in or out of the car when the ignition is on, you can press the
button to unlock the doors and again to re-lock after the doors
have been closed.
* Requires connection to the vehicle’s existing central locking system.
Ignition-Controlled Door Lock/Unlock
Auto-Rearm and Lock