Eurocom M3 - Manual (Page 258)

Video Driver Controls
HDMI Audio Configuration C - 33
C
HDMI Audio Configuration
HDMI (High-Definition Multimedia Interface) carries both
audio and video signals.
In some cases it will be necessary to go to the
Sound control panel and manually
configure the HDMI audio output as per the instructions below.
1. Go to the Control Panel.
2. Click Sound (Hardware and Sound) and click Playback (tab)
3. Depending on your display, the playback device may be selected, however in some
cases you may need to select the audio device and click Set Default (button).
4. Double-click the device to access the control panel tabs illustrated overleaf.

Volume Adjustment
The sound volume level
can be set using the vol-
ume control in the Set-
tings
menu in the
Charms Bar.
Figure C - 28
Sound - HDMI
Device (set Default)