Eurocom Armadillo - Manual (Page 150)

Modules & Options
7 - 6 PC Camera Module
7
Taking Pictures/Capturing Video
1. Make sure the camera is powered on (use the Fn + F10 key combination to toggle
power to the camera module).
2. Click the Camera app icon in the Start screen to run the Camera app .
3. Click to select the timer if you require a countdown before capture.
4. Click to select either photo or video modes.
5. Click in the main window to take a picture or start video capture (if video capture
begins a timer will appear in the bottom right corner of the screen).
6. To stop video capture click the main window again.
7. Captured photos and videos will be saved to a Camera Roll folder within the
Picture folder in Libraries.
Figure 7 - 5
Libraries - Pictures