Eurocom TN12R Tablet - Manual (Page 16)

10 - Tablet PC Input
Concise User’s Guide
English
4. Use the stylus pen to touch the blinking symbol until you hear a beep or the symbol stops blinking (maintain contact until the
symbol stops blinking).
5. The plus ( +) symbol will change from green to white after the reading has been obtained.
Figure 4 - ENE Touch Screen Calibration Tool
6. Repeat the process for all the remaining screen points.
7. Click Draw Test (button) and write on the screen to test the calibration.

Touch Panel Input Device
Do not use any sharp or
pointed objects as your input
device e.g. the end of a pen
or pencil.
Be very careful not to press
too hard with the stylus pen
when using it as the input
device.