Eurocom X3 R2 - Manual (Page 171)

Upgrading The Computer
Upgrading the Optical Device 6 - 9
6
Upgrading the Optical Device (Models E & F)
1. Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2. Locate the secondary hard disk bay cover and remove screws & .
3. Remove the hard disk bay cover.
4. Remove the screw at point , and use a screwdriver to carefully push out the
optical device out of the bay.
5. Reverse the process to install any new optical (CD/DVD) device.
Figure 6 - 5
Removing the
Optical (CD/DVD)
Device
(Models E & F)
1 2
3
1
2
3
Note that though only Model F
is pictured, the cover removal
procedure is identical for all
both models.