Eurocom X3 - Manual (Page 183)

Upgrading The Computer
6 - 30 Upgrading the System Memory (RAM)
6
Replacing the Component Bay Cover
After the RAM has been installed make sure you replace the component bay cover
and all screws.
1. Place the component bay cover on the main computer assembly.
2. Align the markers on the cover and main computer assembly (see the appropriate
component bay cover removal page for your model).
3. Slide the cover in position to lock it.
4. Replace the appropriate screws (see the appropriate component bay cover
removal page for your model).
Figure 6 - 30
Replacing the
Component Bay
Cover
Models A & C Model B
Model D
Model E